Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Fort Walton Beach, FL

Sidewalk & Walkway Cleaning for Exposed Aggregate in Fort Walton Beach, FL

Moderate-pressure wash for exposed aggregate. Walkway, front path and sidewalk cleaning that removes slippery growth, gum and grime. Typical cost $100-$250.

Looking for sidewalk & walkway cleaning for exposed aggregate in Fort Walton Beach, FL? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts. With exposed aggregate, the right approach is moderate-pressure wash.

Method and pressure

Moderate-pressure washCleaning method
Usually 1,500-2,500 PSI with a surface cleanerPressure

Cleaning solution: A concrete pre-treatment and degreaser as needed.

Caring for exposed aggregate

Exposed aggregate concrete has stones showing at the surface. Too much pressure can loosen stones at the edges, and the surface looks best when cleaned and resealed.

Avoid: High pressure at edges and cracks, which can pop out aggregate.

How often: Clean yearly; reseal every 2-3 years.

Is it time for sidewalk & walkway cleaning for exposed aggregate?

  • Slippery paths after rain
  • Green or black growth along shaded edges
  • Gum, leaf stains or rust spots
  • Uneven, blotchy color

Why it gets dirty

  • Shade and moisture along the house
  • Foot traffic and dropped food or gum
  • Leaves and berries that stain
  • Sprinkler overspray

Safe steps for homeowners

  • Sweep away leaves before they stain
  • Scrub small slippery patches with a stiff brush and a deck or patio cleaner
  • Trim plants that keep paths shaded and damp

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Slipping on wet, treated surfaces
  • Water and debris sprayed onto doors, windows and cars
  • Lifting loose joint material between slabs

How we handle sidewalk & walkway cleaning for exposed aggregate

  1. Sweep and inspect
  2. Pre-treat growth and stains
  3. Clean with a surface cleaner
  4. Detail edges and steps
  5. Rinse and post-treat

How much does sidewalk & walkway cleaning for exposed aggregate cost?

$100-$250Typical range for a typical front walk and side paths
About 1 hourTypical time on site
Once a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for exposed aggregate

Sidewalk & Walkway Cleaning for Exposed Aggregate in Fort Walton Beach, FL

Shaded driveways, walkways and pool decks in Florida grow black mildew and algae quickly and can become slippery. Pre-treating the growth before washing, and post-treating after, keeps them clean longer than pressure alone.

Spring pollen season in Florida coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.

Crews serve all of Fort Walton Beach (ZIP codes 32547, 32548 and 32549), plus Ocean City (1.4 mi), Wright (2.7 mi), Mary Esther (3 mi) and Lake Lorraine (3.4 mi). Call (555) 010-0000 for a free quote in Fort Walton Beach.

Sidewalk & Walkway Cleaning for Exposed Aggregate: frequently asked questions

How much does sidewalk & walkway cleaning for exposed aggregate cost in Fort Walton Beach, FL?

Sidewalk & Walkway Cleaning for Exposed Aggregate typically costs $100-$250 for a typical front walk and side paths, and usually takes About 1 hour. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for sidewalk & walkway cleaning for exposed aggregate?

For exposed aggregate: usually 1,500-2,500 PSI with a surface cleaner. What we avoid: high pressure at edges and cracks, which can pop out aggregate. We keep the pressure even and controlled, with the right tools for the surface.

Is sidewalk & walkway cleaning for exposed aggregate safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule sidewalk & walkway cleaning for exposed aggregate?

Clean yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Fort Walton Beach, FL

Exterior Mold & Mildew Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $250-$700

Soft Washing for Tile Roofs

Soft wash. Clay and concrete tile roofs grow algae, moss and lichen, especially in shade.

Typical $300-$800

Deck Cleaning for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$600

Pressure Washing for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $150-$600

Patio Cleaning

Patio cleaning for concrete, pavers and natural stone, with the pressure and cleaner matched to the material.

Typical $150-$400

Exterior Mold & Mildew Removal for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$700

Fence Cleaning

Fence washing for wood and vinyl fences that removes gray weathering, green algae, mildew and sprinkler stains.

Typical $200-$600

House Washing for Log Homes

Low-pressure wash. Log homes need regular cleaning to keep mildew and insects from settling into checks and cracks, and the logs must be clean and dry before a new stain goes on.

Typical $300-$700

Exterior Mold & Mildew Removal

Killing and removing mold, mildew and algae from siding, decks, walkways and fences, with treatment that slows regrowth.

Typical $250-$700

Concrete Sealing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $400-$1,200

Rust Stain Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$500

Gutter Cleaning

Clearing leaves and debris from gutters and flushing downspouts so water drains away from the house.

Typical $150-$350

Ready for a cleaner home or business?

Get a free pressure washing quote in Fort Walton Beach, FL. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote